Low Cost. High-Performance.
Academic
Hands-on learning and research with real-world signals is very important in academia today. At lower cost than you might think, National Instruments provides an intuitive platform that can connect to thousands of sensors and instruments to acquire, analyse and process signals, and present results graphically. Whether programming in C, Basic or LabVIEW on Windows, Mac or Linux, get the latest in PC-based data acquisition, instrumentation and instrument control starting at less than £65 (excluding VAT). Even lower prices available for classroom teaching applications – please contact Ian Evans. Check out your non-Windows OS options at ni.com/mac and ni.com/linux.
12-Bit, 10 kS/s Low-Cost Multifunction DAQ
- 8 analogue inputs; 2 analogue outputs; 12 digital I/O; 32-bit counter
- Bus-powered for high mobility; built-in signal connectivity
- NI-DAQmx driver software and LabVIEW SignalExpress LE interactive data-logging software
£ 99
£ 89.10 (including academic discount)
4-Bit, 48 kS/s Low-Cost Multifunction DAQ
- 8 analogue inputs; 2 analogue outputs; 12 digital I/O; 32-bit counter
- Bus-powered for high mobility; built-in signal connectivity
- NI-DAQmx driver software and LabVIEW SignalExpress LE interactive data-logging software
£ 179
£ 161.10 (including academic discount)
24-bit, 4 ch Low Cost Thermocouple DAQ
- 4 channels of 24-bit thermocouple input
- Compatibility with J, K, R, S, T, N, E and B thermocouple types
- NI-DAQmx driver software and LabVIEW SignalExpress LE interactive data-logging software included
£ 545
£ 490.50 (including academic discount)
16-Bit, 250 kS/s M Series Multifunction DAQ
- 16 analogue inputs; 4 digital inputs; 4 digital outputs; two 32-bit counters
- Bus-powered USB for high mobility; built-in signal connectivity
- NI-DAQmx driver software and LabVIEW SignalExpress LE interactive data-logging software
£ 399
£ 359.10 (including academic discount)
12-bit, 8ch Low Cost, High Speed Analogue Input
- 8 analogue inputs at 12-bit resolution
- 500 kS/s aggregate sampling rate
- NI-DAQmx driver software and LabVIEW SignalExpress LE interactive data-logging software
£ 579
£ 521.10 (including academic discount)
16-Bit, 250 kS/s M Series Multifunction DAQ
- 16 analogue inputs; 2 analogue outputs; 4 digital inputs; 4 digital outputs; 32-bit counters
- Bus-powered USB for high mobility; built-in signal connectivity
- NI-DAQmx driver software and LabVIEW SignalExpress LE interactive data-logging software
£ 499
£ 449.10 (including academic discount)
With InstantDAQ Technology
- NI InstantDAQ technology for instant measurements with your PC, no driver installation required
- Additional applications with added functionality available as free downloads
- NI-DAQmx driver support for LabVIEW graphical programming and software customization
- Compatibility with J, K, R, S, T, N, E, and B thermocouples
- Standard miniplug for easy thermocouple connection
£ 104
Portable USB-Based DAQ for Thermocouples
- Plug-and-play connectivity via USB
- Compatibility with J, K, R, S, T, N, E, and B thermocouple types
- Small, portable devices (12.1 x 8.6 x 2.5 cm)
- Includes NI-DAQmx driver software and NI LabVIEW SignalExpress LE for Windows
- Includes NI-DAQmx Base driver software for Linux and Mac OSs
£ 545
£ 490.50 (including academic discount)
4-Channel Universal Analogue Input Module
- Measure quarter-, half-, and full-bridge sensors
- Built-in voltage and current excitation
- Thermocouple, RTD, resistance, voltage, and current measurements
- Cold-junction compensation (CJC) per channel for a more accurate thermocouple measurement
- Up to 100 S/s/ch simultaneous inputs
£ 815
£ 733.50 (including academic discount)
24-ch, TTL Low Cost USB Digital I/O
- 24 digital I/O lines, one 32-bit counter
- Over-voltage protection, 8.5 mA current drive
- Built-in screw terminals for easy integration
£ 69
£ 62.10 (including academic discount)
8 Solid-State Relays, 8 DI, Counter, Ch-to-Ch Isolated
- Eight 60 VDC/30 Vrms, 500 mA solid-state relays and eight ±60 VDC digital inputs
- One 32-bit, 5 kHz counter
- 60 VDC channel-to-channel isolation
£ 260
£ 234 (including academic discount)
8 ch, 11-30V Digital Input
- 8 sinking digital input channels with 24 V logic levels
- Screw terminal or D-Sub connector options
- 250 Vrms channel-to-earth ground isolation
£ 370
£ 333 (including academic discount)
8 ch, 6-30V Digital Output
- 8 sourcing digital output channels with 24 V logic levels
- Screw terminal or D-Sub connector options
- 250 Vrms channel-to-earth ground isolation
£ 370
£ 333 (including academic discount)
50 MS/s Bus-Powered Digitiser/Oscilloscope
- 2 simultaneously sampled channels with 8-bit resolution
- 50 MS/s real-time sampling; 50 MHz bandwidth
- Soft front panel, NI-SCOPE driver and LabVIEW SignalExpress LE interactive measurement software included
£ 563
£ 506.70 (including academic discount)
100 MS/s Bus-Powered Digitiser/Oscilloscope
- 2 simultaneously sampled channels with 8-bit resolution
- 100 MS/s real-time sampling; 50 MHz bandwidth
- Soft front panel, NI-SCOPE driver and LabVIEW SignalExpress LE interactive measurement software included
£ 763
£ 686.70 (including academic discount)
Low-Cost 6½-Digit USB Digital Multimeter
- 6½-digit resolution; Bus-powered for portability
- 7 built-in measurements - AC/DC voltage, AC/DC current, 2- or 4-wire resistance, and diode test
- Soft front panel, NI-DMM driver and LabVIEW SignalExpress LE interactive data-logging software included
£ 1040
£ 780 (including academic discount)
Learn more about portable instrumentation with new USB instruments
GPIB Controller for Hi-Speed USB 2.0
- Transfer rates up to 1.8 MB/s (Std.) and 7.2 MB/s (HS488)
- No GPIB cable requirement for instrument connection
- Complete IEEE 488.2 compatibility; NI-488.2 driver included
£ 349
£ 314.10 (including academic discount)
Single-Port RS232 Interface for USB
- 230.4 kb/s maximum transfer rate; 128 B transmit and receive FIFOs
- Handles RTS/CTS hardware handshake lines
- NI-Serial driver included; compatible with NI-VISA for easy development in LabVIEW and C/C++
£ 132
£ 118.80 (including academic discount)
Single-Port RS485 Interface for USB
- RS485 and RS422 at up to 460.8 kb/s transfer rate; Communicates with up to 31 devices
- Automatic transceiver-control mode for 2-wire RS485 devices
- NI-Serial driver included; compatible with NI-VISA for easy development in LabVIEW and C/C++
£ 132
£ 118.80 (including academic discount)
I2C/SPI Interface
- Bus-powered USB interface for I2C, SMBus, and SPI communication
High-Level API for LabVIEW and C/C++
Includes 8 general-purpose digital I/O lines
£ 365
£ 328.50 (including academic discount)
Choosing the right software tools can significantly reduce your development time.
All devices ship with FREE ready-to-run configuration based data-logging software, LabVIEW Signal Express LE, reducing your time to first measurement.
All devices can be programmed with industry standard languages such as LabVIEW, C, C++ and Visual Basic with comprehensive example code for developing applications.
NI LabVIEW SignalExpress
NI LabVIEW SignalExpress is interactive, measurement software for quickly acquiring, analysing, and presenting data from hundreds of data acquisition devices and instruments, with no programming required.
£ 830
£ 207.50 (including academic discount)
For more than 20 years, NI LabVIEW graphical programming has revolutionised the development of test, measurement and control applications. Regardless of experience, engineers and scientists can rapidly and cost-effectively interface with measurement and control hardware, analyse data, share results and distribute systems.
From £ 795
From £ 199 (including academic discount)
Measurement Studio
An integrated suite of classes and controls for test, measurement and automation applications in Microsoft Visual Studio 2008/2005.
From £ 396
From £ 99 (including academic discount)
LabWindows/CVI
LabWindows/CVI is a proven ANSI C integrated development environment that provides engineers and scientists with a comprehensive set of programming tools for creating test and control applications.
From £ 1050
From £ 263 (including academic discount)
NI Developer Zone
Developer Zone Community
Discover and collaborate on the latest example code, tutorials, textbooks and more with a worldwide community of engineers and scientists. Share development techniques, learn about cutting-edge technologies, and connect with LabVIEW and other NI product experts working on similar applications.
It's not what we make, it's what we make possible.
NI is a global leader in providing test, measurement, and embedded systems for engineers and scientists.
In 2012, NI UK was named in the UK's 50 Best Workplaces for the seventh consecutive year.
How We Protect Your Privacy | Terms of Use | Legal | ©2012 National Instruments Corporation. All rights reserved.